Start the engine of the booster vehicle and run the engine at moderately increased speed. Pull headlamp forward to access bulb connector. Read the following section on Warnings. Locate the jack notch next to the door closest to the tire you are changing, then place the jack on the frame rail directly behind the notch. The fluid should be in the designated area for normal operating temperature H or ambient temperature C.
After three driving cycles without these or any other temporary malfunctions present, the Service Engine Soon light should turn off. The memory seat control is located on the driver door. If the air bag is inflated, the air bag will not function again and must be replaced immediately. Connect the positive + booster cable to the positive + terminal of the discharged battery. Press — to decrease the time displayed. To properly adjust your head restraints, lift the head restraint so that it is located directly behind your head or as close to that position as possible. See your Ford or Lincoln-Mercury dealer.
Make sure the gearshift is securely latched in P Park. This acts as a reminder that these warning conditions still exist within the vehicle. The fuel gauge may vary slightly when the vehicle is in motion. When in clock mode, the media information will display for ten seconds, when the radio is turned on, and then revert to clock information. The automatic locking mode is not available on the driver safety belt. This gauge indicates the temperature of the engine coolant, not the coolant level.
If you must use a forward-facing child seat in the front seat, move the seat all the way back. Press the control to turn the mirror on or off. Pressing the control for more than three seconds results in fast rewind. Changes made to the seat or mirror positions will automatically be saved to that profile. When fueling your vehicle: 1. This may be necessary to ensure a more precise determination of vehicle location or to track a vehicle that is moving.
Press to move the rear portion of the seat cushion up or down. Carefully position the headlamp assembly onto the vehicle making sure the alignment pins are inserted into the proper holes. Automatic transmission fluid dipstick 2. Make sure the parking brake is set. At the time your phone is activated, ask your carrier to assign you a phone number that does not require a personal identification number.
The vehicle has run out of fuel. If the driver should enter the vehicle without first identifying themselves, all features will remain at their last setting or position and any settings will be saved as vehicle settings not individualized settings. The fluid should be in the designated areas for normal and room temperature. You can also program your own 5—digit personal entry code. Perform all regularly scheduled maintenance items. Engine oil filler cap 7. The fuel gauge may vary slightly when the vehicle is in motion.
Unfortunately, sometimes the huge amount of information available online is a curse rather than a blessing: many websites just do not seem to bother with proper organization of content they offer. The fact that the air bags did not inflate in a collision does not mean that something is wrong with the. Cleaning the wiper blades and windshield If the wiper blades do not wipe properly, clean the wiper blade rubber element with undiluted windshield washer solution or a mild detergent. Fuel such as gasoline is highly toxic and if swallowed can cause death or permanent injury. Start the engine of the disabled vehicle.
Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire. Hard objects can injure you in a collision. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1. Replacing license plate lamp bulbs For bulb replacement, see a dealer or qualified technician. Anytime that the media is changed, new radio station, etc. . Press and release the HomeLink button a second time to complete the training process.